View 67-21-Y2C-BR2T1B-2T_569684.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Features
P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use.
Device Selection Guide
Chip Emitted Color Material AlGaInP Brilliant Yellow Water Clear Resin Color
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 1 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Package Dimensions
Note: Tolerances Unless Dimension 0.1mm; Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0001118 http://www.everlight.com Prepared date: 8-April-2009 Rev. 2 Page: 2 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature
)
Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 50 120 100 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. Unit V mA mA mW V
Electro-Optical Characteristics (Ta=25
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol IV 21/2 p d VF IR Min. 140 --------588.5 ----1.75 -----
)
Typ. ----120 591 ----15 --------Max. 360 --------594.5 ----2.35 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 3 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Bin Range of Dominant Wavelength
Group B D5 591.5 594.5 Bin Code D4 Min 588.5 Max 591.5 nm IF=20mA Unit Condition
Bin Code Range of Luminous Intensity
Bin Code R2 S1 S2 T1 Min 140 180 225 285 Max 180 225 mcd 285 360 IF=20mA Unit Condition
Bin Rang of Forward Voltage
Group Bin Code 0 B 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 V IF=20mA Unit Condition
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 4 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25C Forward Current I (mA) F Forward Current vs. Forward Voltage
50 40 30 20 10 0
1.6 1.8 2.0 2.2
Ta=25C
50 25
0 500
550 600 650 Wavelength (nm)
700
2.4
2.6
Forward Voltage V (V) F Relative Luminous Intensity vs. Forward Current Ta=25C 1000
f=1KHz Duty=1/10
Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) 1000
100
100
10
10
1 -60 -40 -20
1
0 20 40 60 80 100
0 10
Ambient Temperature Ta (C) Forward Current Derating Curve 50 Forward Current I F (mA) 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7
2 1 10 10 Forward Current I F (mA) Radiation Diagram 0
3 10
Ta=25C 10 20 30
40 50 60 70 80 90
0.5 0.3
0.1
0.2 0.4 0.6
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 5 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: Tolerances Unless Dimension 0.1mm; Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 6 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel.
Note: Tolerances Unless Dimension 0.1mm; Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 7 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No. 1 2 3 4 5 6 7
Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
Test Condition Temp. : 260 5 5sec. Min.
Test Hours/Cycles 6 Min. 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS.
Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1
H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 8 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
Precautions for Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 9 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet Top View LEDs
67-21/Y2C-BR2T1B/2T
4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-0001118
http://www.everlight.com Prepared date: 8-April-2009
Rev. 2
Page: 10 of 10
Prepared by: Teresa
Revision
:2
Release Date:2009-04-21 23:04:45.0 Expired Period: Forever
LifecyclePhase:

▲Up To Search▲

Price & Availability of 67-21-Y2C-BR2T1B-2T

	To Download 67-21-Y2C-BR2T1B-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .